Dynapac DTR75, Operating Instruction

Page: 105 / 120

4. Press the ventilation lever for approx. 15 seconds against the
spring.
ð
The engine is ready for starting.
If the engine does not start after
bleeding, contact our customer service
department.
8.11.6 Measures if there is a risk of frost
Protective equipment: n Working clothes
n Safety shoes
n Protective gloves
1. Park the machine safely Ä Chapter 6.6 „Parking the machine
in secured condition“ on page 67 .
2. Remove the cover of the filler opening.
3. Switch on the water spraying system and drain the water
completely.
4. Close the cap.
8.11.7 Measures prior to extended shut-down period
8.11.7.1 Measures before shutting down
If the machine is shut down for a longer period of time, e.g. winter
season, the following work must be carried out:
1. Clean the machine thoroughly.
2. Clean the water separator.
3. Fill the fuel tank with diesel fuel, to prevent the formation of
condensation water in the tank.
4. Change engine oil and oil filter if the oil change had been car-
ried out more than 300 operating hours ago.
5. Change the fuel filter.
6. After shutting down store the machine under cover in a dry
and well ventilated room.
7. Protect the cooled down engine against dust and moisture.
Fig. 109
Water
B-834-0238
Fig. 110
Maintenance – As required
DTR75 105