manualshive.com logo in svg

Dynapac DR6X, Operating Instruction

The Dynapac DR6X Operating Instruction manual is available for free download on manualshive.com. This comprehensive manual provides detailed guidance on how to operate the Dynapac DR6X efficiently and safely. Download your copy today to ensure you get the most out of your equipment.

Share
Download
background image

8.9  Annually

8.9.1  Checking, adjusting the valve clearance

NOTICE!
Danger of engine damage!

We recommend to have this work carried out by

trained personnel or our after sales service.

–

Before checking the valve clearance let the

engine cool down.

Protective equipment:

n

Working clothes

n

Safety shoes

n

Protective gloves

1.

Park the machine safely

 

Ä

 Chapter 6.4 „Parking the machine

in secured condition“ on page 55

.

2.

Let the engine cool down to ambient temperature.

3.

Pull the air feed hose (1) and the hose clamp (2) off the cover

(3).

4.

Disassemble the cover (1) and air filter (2).

Preparations

1

3

2

B-541-0072

Fig.  60

2

1

B-541-0073

Fig.  61

Maintenance – Annually

 

DR6X

 

76

Summary of Contents for DR6X



















































































































Reviews:

No comments

Related manuals for DR6X

Brands by name

Popular brands

Load more brands