Dynapac DR6X, Operating Instruction

Page: 44 / 114

5.3 Checking the engine oil level
NOTICE!
Danger of engine damage!
– +Use only oil of the permitted specification
Ä
Chapter 8.2.1 „Engine oil“ on page 65 .
The engine cannot be started if the engine oil level
is too low.
Protective equipment: n Working clothes
n Protective gloves
1. Park the machine so that the tamper foot is in horizontal posi-
tion.
2. Clean the area around the oil dipstick (1).
3. Unscrew the dipstick and wipe it clean with a lint-free, clean
cloth.
4. Insert the dipstick into the oil filler socket, do not screw it in,
but pull it out again to check the oil level.
5.
NOTICE!
Danger of engine damage!
– Do not overfill the engine.
The oil level must always be between the "MIN"- and "MAX"-
marks. If the oil level is too low, top up oil to the "MAX" mark
immediately.
Fig. 18
Checks prior to start up – Checking the engine oil level
DR6X 44