Dynapac DR6X Operating Instruction Download Page 107

Page: 107 / 114

Protective equipment:

Working clothes

Protective gloves

Safety goggles

Special tool:

16 mm spark plug spanner

Pull off the spark plug socket (1).

Unscrew the spark plug with a 16 mm spark plug spanner

(2).

Operate the recoil starter several times.

CAUTION!
Danger of eye injuries caused by particles

flying around!

–

Wear your personal protective equipment

(safety gloves, protective working

clothes, goggles).

Dry the spark plug with a clean cloth or blow it dry with com-

pressed air.

If necessary, clean the spark plug with a wire brush.

Screw the spark plug carefully in by hand and once the

sealing surface of the used spark plug is in contact tighten for

another 1/8 to 1/4 turn with the spark plug spanner.

Plug the spark plug socket back on.

Repeat the starting procedure.

Cleaning the spark plug

Fig. 126

Troubleshooting – What to do if the engine has flooded

DR6X

107

Summary of Contents for DR6X



















































































































Search results

Summary of Contents for DR6X

Reviews:

Brands by name

Popular brands

Dynapac DR6X, Operating Instruction

Search results

Summary of Contents for DR6X

Reviews:

Brands by name

Popular brands