Dynapac DFP10D, Operating Instructions And Maintenance Instructions

Page: 77 / 98

1. Loosen screw (3) on the rocker arm.
2. Adjust the hexagon nut (2), until the feeler gauge (1) can be
inserted and pulled out with noticeable resistance after the
screw (3) has been tightened.
1. Install the valve cover (2) with a new gasket.
2. Tighten the fastening screws (1) evenly.
3. Assemble covering (1) and air filter cover (2).
4. After a short test run check the valve cover for leaks.
8.7.3 Replacing the V-belt
Protective equipment: n Working clothes
n Safety shoes
n Protective gloves
1. Park the machine safely
Ä
Chapter 6.4 ‘Parking the machine
in secured condition’ on page 57 .
2. Allow the engine to cool down.
Adjusting the valve clearance
Fig. 63
Final work
Fig. 64
Fig. 65
Maintenance – Annually
DFP10D 77