Dynapac DFP10D Operating Instructions And Maintenance Instructions Download Page 68

Page: 68 / 98

8.4 Running-in instructions

8.4.1 General

The following maintenance work must be performed when running

in new machines or overhauled engines.

8.4.2 After 25 operating hours

Change the engine oil.

Check the valve clearance, adjust if necessary

Chapter

8.7.2 ‘Checking, adjusting the valve clearance’ on page 75

Check engine and machine for leaks.

Retighten the fastening screws on air filter, exhaust and other

attachments.

Retighten the bolted connections on the machine.

Check the V-belt.

Check the oil level in the exciter shaft housing

Chapter

8.8.4 ‘Checking the oil level in the exciter housing’

on page 86

Maintenance – Running-in instructions

DFP10D

Summary of Contents for DFP10D



































































































Search results

Summary of Contents for DFP10D

Reviews:

Related manuals for DFP10D

Brands by name

Popular brands

Dynapac DFP10D, Operating Instructions And Maintenance Instructions

Search results

Summary of Contents for DFP10D

Reviews:

Related manuals for DFP10D

Brands by name

Popular brands