Maintenance - Every 1,000 hours
2018-02-08
4812325555EN
95
Lubricate the upper/lower pivot bearing
1. Lubricate the grease fitting of the upper pivot bearing (1)
and the grease fitting of the lower pivot bearing (2)
operating the grease gun manually with five pump strokes.
2. Use the grease according to the lubricant specifications
recommended by
DYNAPAC
.
Replace the wheel gear oil
Be extremely careful when draining the oil. Use
gloves and protective goggles to prevent the
hot oil getting in contact with the skin, which
can cause burns.
1. Unscrew the drain plug (1).
2. Put a container with 5.28 gal (20 liters) of capacity under
the drain plug.
3. Unscrew the drain plug (1) and the filling plug (2) to
evacuate the air. Allow all the oil to drain out to the container
and refit the plugs.
TAKE CARE OF THE ENVIRONMENT: All the
used oil shall be properly stored for
subsequent disposal. Do not dispose of oil on
the ground, sewage system or other place
which can harm the environment.
Fig. - Wheel gear
1. Drain plug
2. Filling plug
1
1
2
1
2
Fig. - Pivot bearings
1. Upper pivot bearing grease fitting
2. Lower pivot bearing grease fitting
2
1
