Dynapac CP2100, Instruction Manual

Page: 75 / 113

Scheduled maintenance and lubrication
2018-02-08 4812325555EN 71
WEEKLY (after the first 50 hours of operation)
POSITION
IN THE
FIGURE
ACTION NOTES
1, 2 Replace the Diesel engine oil and
the oil filter Refer to the engine
manual instructions.
10 Check and replace the main air
filter Refer to the engine
manual instructions.
10 Check and replace the secondary
air filter Refer to the engine
manual instructions.
3 Replace the engine fuel filter Refer to the engine
manual instructions.
4 Replace the hydraulic oil filters
20 Lubricate the lower pivot bearing
21 Lubricate the upper pivot bearing
23 Replace the wheel gear oil
WEEKLY (Every 50 hours of operation)
POSITION
IN THE
FIGURE
ACTION NOTES
- Check the engine air intake system Refer to the engine
manual instructions.
- Check the tires air pressure
- Retighten the wheel nuts
10 Check and clean the engine air
filter elements Replace them, if
necessary
- Drain the fuel pre-filter Refer to the engine
manual instructions.
18 Check the air conditioning When equipped (option)
- Clean the air conditioning
19 Check and lubricate the edge cutter When equipped (option)
20 Lubricate the lower pivot bearing
21 Lubricate the upper pivot bearing