Dynapac CP2100, Instruction Manual

Page: 77 / 113

Scheduled maintenance and lubrication
2018-02-08 4812325555EN 73
EVERY SIX MONTHS (Every 1,000 hours of operation)
POSITION
IN THE
FIGURE
ACTION NOTES
- Check the Diesel engine valve
clearances Refer to the engine
manual instructions.
- Check the engine propulsion
system Refer to the engine
manual instructions.
10 Replace the main and the
secondary air filters
Replace the air dryer filter Machine equipped with
AOR
4 Replace the hydraulic oil filters
17 Replace the cab air filter
20 Lubricate the lower pivot bearing
21 Lubricate the upper pivot bearing
23 Replace the wheel gear oil
23 Check the wheel gear oil level
ANNUALLY (Every 2,000 hours of operation)
POSITION
IN THE
FIGURE
ACTION NOTES
6 Replace the hydraulic oil
11 Clean the fuel tank
13 Clean the water tank
14 Clean the sprinkler system
- Check the pilot bearings
9 Replace the coolant Refer to the engine
manual instructions.
- Check the air conditioning When equipped (option)
20 Lubricate the lower pivot bearing
21 Lubricate the upper pivot bearing