Dynapac CC7200, Instruction Manual

Page: 51 / 101

Operation
4812158801_E.pdf 2018-04-03
Operator's station
1
2
3
Fig. Operator's station
1. Seat belt
2. Rubber ement
3. Anti-slip
Always fasten the seat belt (1) that is provided if a
ROPS (Roll Over Protective Structure) is fitted on the
roller, and wear a protective helmet.
Always replace the seat belt (1) with a new one
if it is worn or has been subjected to a heavy
load. Always replace the seat belt (1) with a new one
if it is worn or has been subjected to a heavy
load.
Check that rubber elements (2) on the platform
are intact. Worn elements will impair comfort. Check that rubber elements (2) on the platform
are intact. Worn elements will impair comfort.
If the machine is fitted with a cab, make sure that
the doors are closed when in motion. If the machine is fitted with a cab, make sure that
the doors are closed when in motion.
Make sure that anti-slip (3) on the platform is in
good condition. Replace with new anti-slip if
friction is poor. Make sure that anti-slip (3) on the platform is in
good condition. Replace with new anti-slip if
friction is poor.
43