Dynapac CC1300C Instruction Manual Download Page 126

Page: 126 / 128

Maintenance - 2000h

4812161201_F.pdf

2018-04-17

Water tank - Cleaning

Fig. Water tank
1. Drain plug

Clean the tanks with water and a suitable detergent for
plastic surfaces.

Refit the filter housing or the drain plug (1). Fill with
water and check for leaks.

The water tanks are made of plastic
(polyethylene) and are recyclable.

Emulsion tank - Draining

Fig. Pump system
1. Stop cock
2. Drain cock
3. Drain hose

Open the cock (1) and the drain cock (2), which is
located in the left step. The hose (3) facilitates draining
the emulsion fluid into a suitable receptacle.

When cleaning the tank, see Water tank - Cleaning.

The Emulsions tank is made of plastic
(polyethylene), and is recyclable.

116

Summary of Contents for CC1300C

































































































































Search results

Summary of Contents for CC1300C

Reviews:

Related manuals for CC1300C

Brands by name

Popular brands

Dynapac CC1300C, Instruction Manual

Search results

Summary of Contents for CC1300C

Reviews:

Related manuals for CC1300C

Brands by name

Popular brands