Dynapac CC1300C Instruction Manual Download Page 88

Page: 88 / 128

Maintenance, 10h

4812161201_F.pdf

2018-04-17

Scrapers, spring-action (Optional)
Checking - Adjustment

Fig. Spring-action scrapers
1. Scraper blade
2. Adjusting screws

The scrapers must be lifted from the drum during
transport.

Scrapers
Check - Adjustment

Fig. Wheel scrapers
1. Scraper
2. Scraper blade
3. Lock pin
4. Adjusting screw

Make sure that the scraper (1) is flush with the tire
when compacting asphalt.

The scrapers must hang clear of the tires during
transport. Lift up the scraper beam (2) by moving up
the cotter (3) to the uppermost hole.

The angle of the scraper to the tire can be adjusted by
releasing the screws (4) to adjust the scraper, and
then tightening the screws.

Summary of Contents for CC1300C

































































































































Search results

Summary of Contents for CC1300C

Reviews:

Related manuals for CC1300C

Brands by name

Popular brands

Dynapac CC1300C, Instruction Manual

Search results

Summary of Contents for CC1300C

Reviews:

Related manuals for CC1300C

Brands by name

Popular brands