25
CC82/92 M092EN3
Fuses
The machine is equipped with a 12 V electrical system
and an alternator.
Connect the battery to the correct polarity (- to
earth). The cable between battery and
alternator must not be disconnected when the
engine is running.
Before electric welding on the machine,
disconnect the earthing cable of the battery
and then all electrical connections to the
alternator.
The electrical regulating and control system is
protected against overload by fuses fitted in the fuse
box, which is located in the engine compartment to the
left of the battery.
Fig. 38 Left fuse box (standard)
7,5 A
1. Starter
15 A
2. Fan, hydraulic fluid cooler
7,5 A
3. Sprinkler, neutral switch relay
7,5 A
4. Horn, fuel gauge
7,5 A
5. Reversing signal
6. VBS-relay, AVC
Fig. 39 Right fuse box (optional)
15 A
1. Driving lights
15 A
2. Working lights
5 A
3. Direction indicator right
5 A
4. Direction indicator left
10 A
5. Hazard beacon
10 A
6. Blinkers relay
The figures show the ampere rating and function of the
different fuses.
The left fuse box is found in all machines.
The right fuse box is provided only in machines
equipped with electric accessories.
Remove the cover plate on the front of the steering
column to gain access to the fuses. The plate is held in
position by two screws.
1
2
3
4
5
6
1
2
3
4
5
6
ELECTRICAL SYSTEM, FUSES
CAUTION
CAUTION
Summary of Contents for CC 82
Page 2: ...19 ILF015WO1...
