Dynapac CC 82, Maintenance Manual

Page: 15 / 27

13 CC82/92 M092EN3
EVERY 50 HOURS OF OPERATION (Weekly)
Place the roller on a level surface. Switch
the engine off and push in the reserve/
parking brake knob for all checking and
adjustments on the roller, unless otherwise
specified.
Allow no one to get near the steering joint
when the engine is running. Danger of
being crushed when steering is operated.
Push the reserve/parking brake knob befo-
re lubricating.
Turn the steering wheel fully to the right to gain access
to all five grease nipples (1) from the left side of the
machine.
Wipe the grease nipples (1). Grease each nipple with
three strokes of the hand-operated grease gun. Make
sure that grease penetrates the bearings. If not, it may
be necessary to relieve the articulation joint with a jack
while repeating the greasing process.
1
Steering cylinder and articulated
steering – Lubrication
1
Press the rubber bellows with your fingers to empty the
dust trap (1) in the air cleaner. Make sure that the air
hoses are intact.
Air cleaner – Emptying
Fig. 11 Steering joint, left side
1. Lubricating nipples
Fig. 12 Air cleaner
1. Dust trap
WARNING
WARNING