Dynapac CC 722C, Maintenance Manual

Page: 27 / 28

25 CC 722/722C M722EN2
Fuses
Fig. 35 Säkringsdosor i styrpelaren
1. Sprinkler
2. Brake valve
3. Vacant
4. AVC Vibration pump
5. Drum offset
6. Hazard beacon
7. Rear water pump
8. Front water pump
9. VBS, RPM relay
10. Warning panel, instruments
11. Reversing alarm, horn
12. Start
The machine is equipped with a 12 V electrical system
and an alternator.
Connect the battery to the correct polarity
(– to ground). The cable between battery
and alternator must not be disconnected
while the engine is running.
When you weld on the machine, the
positive and negative terminals of the
battery must be disconnected. Never
connect the welder ground to the diesel
engine.
Fuses located in the fuse boxes protect the electrical
regulating and control system.
The figure illustrates the function of the various fuses.
The fuse boxes are located in the steering column.
13. Working lights
14. Left parking lights
15. Left dipped headlight
16. Right dipped headlight
17. QsB motor
18. Diagnostic lamps
19. QsB motor
20. QsB motor
21. QsB motor
22. QsB motor
The electrical system in the cab has an individual fuse
box located in the left side of the cab roof.
Fig. 36 Fuse box in cab (accessory)
1. Cab lighting/washer
2. Ventilation fan
3. Lights, rear
4. Lights, front
5. Wiper, windshield and side
6. Cab heating
Fuses in the cab
23. QsB motor
24. Vacant
25. Right parking lights
26. Left direction indicator
27. Right direction indicator
28. Left main beam
29. Right main beam
30. Right brake light
31. Left brake light
32. Vacant
ELECTRICAL SYSTEM, FUSES