Dynapac CC 722C, Maintenance Manual

Page: 12 / 28

10 CC 722/722C M722EN2
EVERY 10 HOURS OF OPERATION (DAILY)
1
31
9 24
Take great care if the radiator cap must be
opened while the engine is hot.
Danger of being burned. Wear gloves and
safety goggles.
Fill with coolant comprised of 50% water and 50%
antifreeze. See page 3 in these instructions and the
engine manual.
Change the coolant and flush the system
every other year. Ensure that air has free
passage through the radiator.
Coolant level – Checking,
filling (Circulation of cooling air)
Fig. 2 Radiator cap
Open the drain tap at the bottom of the outer fuel filter
and drain off water and sediment until pure fuel flows
out. See also engine manual.
WARNING
CAUTION
Check brake function:
Drive the roller slowly forward.
Push in the reserve/parking brake knob (9). The roller
should slow down and come to a standstill as the brake
warning lamp (31) lights.
After checking the brakes, put the forward/reverse
lever (24) in neutral before resetting the parking brake.
Pull up the reserve/parking brake knob.
Fig. 3 Water trap on the fuel filter
1. Drain cock
Brakes – Check
Fig. 4 Instrument panel
9. Reserve/parking brake knob
24. Forward/Reverse lever
31. Brake warning lamp
Water trap – Draining
WARNING