Dynapac CA152D, Maintenance Manual

Page: 14 / 35

12 CA152 M152EN3
Refuel daily with diesel fuel up to the lower edge of the
filler pipe (1). Follow the engine manufacturer’s
specification with regard to the quality of diesel fuel.
Switch off the diesel engine. Short-circuit
(press) the filler gun against a non-insula-
ted part of the roller before refuelling, and
against the filler pipe (1) while refuelling.
Never refuel while the engine is running,
do not smoke, and avoid spilling fuel.
See the engine manual with regard to quality of diesel fuel.
The tank holds 225 litres (59.4 gal).
EVERY 10 OPERATING HOURS (DAILY)
1
2
1 2
1
Fig. 8 Fuel tank
1. Tank cap
Fuel tank – Filling
Hydraulic reservoir
– Check fluid level
Brake function – Check
Fig. 10 Control panel
1. Reserve-/parking brake knob
2. Forward/reverse lever
Fig. 9 Hydraulic fluid reservoir
1. Sight glass
2. Filler pipe
Check operation of the brakes as follows:
Drive the roller slowly forward.
Push the reserve/parking brake knob (1); the warning
lamp on the instrument panel should light and the roller
should stop.
After testing the brakes, set the forward/reverse lever
(2) in neutral.
Pull up the reserve-/parking brake knob.
The roller is now ready for operation.
Position the roller on a level surface and check that the
sight glass reading (1) is between the max. – min.
marks. Top off with hydraulic fluid according to the lu-
bricant specification if the level is too low.