Dynapac CA152D, Maintenance Manual

Page: 11 / 35

9 CA152 M152EN3
MAINTENANCE MEASURE
Item. in Measure See page Comments
fig. 1
23 Check the oil level in rear axle/planetary
gearing
17
15 Check the oil level in drum 17
32 Clean the radiators 18
20, 24 Inspect and tighten bolted joints 18 Applies only to new and
repaired components
16 Inspect rubber elements and bolted joints 18
30 Inspect the battery 19
Inspect the air conditioning 19 Optional
Every 250 operating hours (monthly)
Item. in Measure See page Comments
fig. 1
8 Change the hydraulic fluid filters 22
9 Drain condensate from hydraulic tank 22
26 Drain condensate from fuel tank 23
4 Replace air cleaner main filter 23
22 Change oil in rear axle differential 23
23 Change oil in rear axle planetary gears 24
38 Replace the fresh air filter in the cab 24 Optional
Check diesel engine valve clearance See engine manual
33 Check belt tension for drive belt system See engine manual
Every 1000 operating hours (every six months)
Item. in Measure See page Comments
fig. 1
9, 10 Change fluid in hydraulic tank 25
12, 15 Change oil in roller 25
37 Lubricate Forward/Reverse control 26
Overhaul air conditioning 27 Optional
Every 2000 operating hours (every year)
Item. in Measure See page Comments
fig. 1
3 Replace fuel filter See engine manual
5 Lubricate controls and joints 20
3 Replace fuel pre-filter 20
25 Change engine oil and oil filter 20 See engine manual
36 Lubricate the steering chain 21 Optional
35 Lubricate the seat bearing 21 Optional
7 Check bleeder filter on hydraulic tank 22
Every 500 operating hours (every three months)