Dynapac CA152D, Maintenance Manual

Page: 10 / 35

8 CA152 M152EN3
MAINTENANCE MEASURE
Periodic maintenance shall be carried out at the
specified intervals, that is to say either every day,
every week etc., or after the specified number of opera-
ting hours, whichever comes first.
Always first remove all exterior dirt before
filling up fluids etc., and before checking oil
and fuel levels, and also when lubricating with
grease or oil.
The engine manual specifies additional ser-
vice/maintenance instructions which relate to
the diesel engine.
Item. in Measure See page Comments
fig. 1
Before the day’s first start
14 Check scraper setting 10
1 Check for free circulation of cooling air 11
31 Check coolant level 11 See engine manual
2 Check diesel engine oil level 11 See engine manual
29 Top up fuel tank 12
6 Check fluid level in hydraulic tank 12
Check brakes 12
Every 10 operating hours (daily)
Item. in Measure See page Comments
fig. 1
Check that hoses and couplings are not leaking
7 Clean the filter element of the air cleaner 13 Replace as required
17 Lubricate steering joint 14
18 Lubricate the steering cylinder brackets 14
20 Check the wheel-nuts are tightened 15
21 Check tire pressure 15
39 Inspect the air conditioning 15 Optional
- Lubricate the strike-off blade bearings. 16 Optional
After the first 50 hours of operation change only the drum oil and all the oil filters.
Every 50 operating hours (weekly)