Dynapac CA134, Instruction Manual

Page: 78 / 106

Maintenance - Maintenance schedule
ICA134-3EN2.pdf 2012-04-13
Every 500 hours of operation (Every three
months)
Refer to the contents to find the page number of the
sections referred to !
Pos. in
fig Action Comment Pos. in
fig Action Comment
3 Replace fuel filter Refer to the engine manual 3 Replace fuel filter Refer to the engine manual
32 Lubricate controls and joints 32 Lubricate controls and joints
25 Change the engine oil and oil filter Refer to the engine manual 25 Change the engine oil and oil filter Refer to the engine manual
7 Check air cleaner on hydraulic reservoir 7 Check air cleaner on hydraulic reservoir
31 Check the belt tension for the drive system Refer to the engine manual 31 Check the belt tension for the drive system Refer to the engine manual
Every 1000 hours of operation (Every six
months)
Refer to the contents to find the page number of the
sections referred to !
Pos. in
fig Action Comment Pos. in
fig Action Comment
8 Change hydraulic fluid filter 8 Change hydraulic fluid filter
9 Drain the condensate from hydraulic reservoir 9 Drain the condensate from hydraulic reservoir
26 Drain condensate from fuel tank 26 Drain condensate from fuel tank
22 Change oil in rear axle differential 22 Change oil in rear axle differential
22 Change the oil in the rear axle pinion housing 22 Change the oil in the rear axle pinion housing
23 Change oil in the rear axle planetary gearing 23 Change oil in the rear axle planetary gearing
Every 2000 hours of operation (Yearly)
Refer to the contents to find the page number of the
sections referred to !
Pos. in
fig Action Comment Pos. in
fig Action Comment
9 Change the hydraulic fluid 9 Change the hydraulic fluid
12 Change the oil in the drum 12 Change the oil in the drum
17 Check the steering joint 17 Check the steering joint
70