Dynapac CA134 Instruction Manual Download Page 38

Page: 38 / 106

Machine description- Decals

ICA134-3EN2.pdf

2012-04-13

Safety decals

Always make sure that all safety decals are completely
legible, and remove dirt or order new decals if they
have become illegible. Use the part number specified
on each decal.

4700903423
Warning - Rotating engine components.

Keep your hands at a safe distance from the
danger zone.

4700903459
Warning - Instruction manual

The operator must read the safety, operation and
maintenance instructions before operating the
machine.

4700903422
Warning - Crush zone, articulation/drum.

Maintain a safe distance from the crush zone.

4700908229
Warning - Risk of crushing

The articulation must be locked when lifting.

Read the instruction manual.

4700903424
Warning - Hot surfaces in the engine compartment.

Keep your hands at a safe distance from the
danger zone.

4700791642
Warning - Starting gas

Starting gas is not to be used.

Summary of Contents for CA134











































































































Search results

Summary of Contents for CA134

Reviews:

Related manuals for CA134

Brands by name

Popular brands

Dynapac CA134, Instruction Manual

Search results

Summary of Contents for CA134

Reviews:

Related manuals for CA134

Brands by name

Popular brands