Dynamix UM-SE G.SHDSL.bis EFM Bridge Modem User Manual V003
83
4.4.5 RATE
Move the cursor “ >> “ to Rate and press enter.
-----------------------------------------------------------------------------
>> port Modify port rate
list Show Rate Control configuration
-----------------------------------------------------------------------------
Select which port you want to modify and then set up the data rate.
-----------------------------------------------------------------------------
Command: setup rate port <1~6> <no_limit|128K|256K|512K|1M|2M>
Message: Please input the following information.
Port index <1~6>: 1
rate (TAB Select) <no_limit>:
-----------------------------------------------------------------------------
Setup data rate per port:
Port 1
LAN1
□
No limit
□
128K
□
256K
□
512K
□
1M
□
2M
Port 2
LAN2
□
No limit
□
128K
□
256K
□
512K
□
1M
□
2M
Port 3
LAN3
□
No limit
□
128K
□
256K
□
512K
□
1M
□
2M
Port 4
LAN4
□
No limit
□
128K
□
256K
□
512K
□
1M
□
2M
Port 5
DSL
□
No limit
□
128K
□
256K
□
512K
□
1M
□
2M
Port 6
Sniffing
□
No limit
□
128K
□
256K
□
512K
□
1M
□
2M
4.4.6 MGMT
Move the cursor “ >> “ to mgmt and press enter.
MGMT interface parameters can be configured MGMT IP address and subnet mask.
----------------------------------------------------------------------
Command: setup mgmt <1~1> <more...>
Message: Please input the following information.
Interface number <1~1>:
----------------------------------------------------------------------
The EFM modem only has one MGMT interface can use, so that use the default interface
number is 1. The default IP address and subnet mask are 196.168.1.1 and 255.255.255.0 .
>> address
MGMT IP address and subnet mask
----------------------------------------------------------------------
Command: setup mgmt 1 address <ip> <netmask>
Message: Please input the following information.