Dynamix US-SE, User Manual, Page: 37 / 105

Dynamix UM-SE G.SHDSL.bis EFM Bridge Modem User Manual V003
36
3.5.3 QoS
QoS(Quality of Service) refers to both a network’s ability to deliver data with minimum delay,
and the networking methods used to control the use of bandwidth. Without QoS, all traffic date
is equally likely to be dropped when the network is congested. This can cause a reduction in
network performance and mark the network inadequate for time-critical application such as
video-on-demand.
Click QoS to configure QoS
QoS ( Quality of Service) is to decide which PCs can get the priorities to pass though EFM
modem once if the bandwidth is exhausted or fully saturated.
The priority modes have three types: Port Based Priority, VLAN Tag Priority and IP DSCP
Priority. You can also set Disable the QoS function.