25
Note the ‘Community Name’ of SNMP monitor utility (set in the field ‘Community’ of ‘Preference/General’ window)
must be identical to the ‘GET’ and ‘TRAP’ community inside each managed member (set by the configuration
utility in the ‘Member/Property/SNMP’ window). Each SNMP manager must indicate the name of the community
it belongs in all ‘GET’ and ‘TRAP’ operations. The community name could be unique to allow set of SNMP
managers to access to the agent. The default ‘GET’ and ‘TRAP’ community name of DYNAMIX DH - 114 Mis
‘
public
’.
HomePNA port Setting
This section describes the items in the ‘
Setting
’ window in more details. As shows in the following figure:
♦
Reset
Reset current HomePNA port.
♦
Port Control
To disable or enable current port. The disabled port will be shut down.
♦
Link Status
It is an indicator to show the link is activated or not.
♦
Priority
Range 0~7, select the traffic priority of current port, ‘7’ is the highest priority level and ‘0’ is lowest.
♦
Line Speed
Select speed from 4Mbps to 10Mbps, please select low speed for reliable transmission if the phone line
quality is not so good. Otherwise, the performance may be degraded. The factory default is 8Mbps.
