12
The directory naming ‘
Location-A
’ and switch naming ‘
SW-1
’ in current domain ‘
TEST
’ defines your connecting
topology; you can define different layering structure according to the real wiring architecture. The username and
password in the above window are used to login the ‘
SW-1
’ switch system.
NOTE:
The IP information field in the above figure will be enabled when you add a switch member by remote
configuration (i.e. login with connection type ‘
Internet
’). You may denote the IP address of your switch system.
Or if the utility is allowed to pass through the firewall and access the switch system behind the firewall; you need
the IP address of the firewall, and maybe you need to specify the different port number for ‘Telnet/FTP’ to pass
the firewall.
NOTE:
The factory default
Username
/
Password
for DYNAMIX DH - 114 M/DYNAMIX DH - 114 is ‘
user1
/
root
’.
You may change them
in ‘
Member/Property
’ window of configuration utility after you login successfully as the
domain supervisor.
Click button ‘
Next
’ in the above property window will show the next security property window that control the
access rights for all managing users (There is only one user--supervisor in our example now).
Click button ‘
Finish
’, then utility will try to connect ‘
SW-1
’ and to retrieve current setting inside the switch. These
retrieved setting will be updated according to your previous configuration. The detail property window will pop out
automatically and request you to confirm the configuration. Including System IP environment, SNMP and
Security access rights control. Here's the Property/System and Property/SNMP windows in our example,
Name:
the complete path to locate ‘
SW-1
’ in current domain
