Dynamix DC – 16 S/SA 16 ports SHDSL DSLAM modem/router
User Manual
Problems with Configuration
Describes how to solve the problems of your Dynamix DC-16S/SA doesn’t work
with configured settings.
Table 7-2 Troubleshooting the Dynamix DC-16S/SA configured setting
Problems
Steps to Take
Your configuration
settings do not take
effect at restart
Use the command: save to save your configuration
before
you restart the Dynamix DC-16S/SA. (See “Saving
the system” section on page 67)
If the above corrective action doesn’t work, contact
for
technical support.
Problems with SNMP
Describes how to solve the problem of getting information from Dynamix DC- 16S to
SNMP manager server.
Table 7-3 Troubleshooting the SNMP server
Problems
Steps to Take
The SNMP
manager server
can not get
information from
Dynamix DC-
16S/SA
Check to see that the community in the Dynamix DC-
16S
matches the SNMP server’s community.
Check to see if VLAN ID is set
If the above corrective action doesn’t work, contact for
technical support.
Problems with Telnet
Describes how to solve the problem of being unable to telnet to your Dynamix
DC-16S.
Table 7-4 Troubleshooting Telnet
Problems
Steps to Take
