Dynamix DC – 16 S/SA 16 ports SHDSL DSLAM modem/router
User Manual
Step 3: Enter the command “ show sysip” to get the <IP address> of
Dynamix DC-16S/SA. If you already know the IP address, you can
skip this step.
Example
IPDSLA/SHDSL M# show sysip
IP: 192.168.10.2
Submask: 255.255.255.0
Gateway: 192.168.10.1
Note:
Make sure that the system IP and your computer is in the same subnet.
Step 4: Open another window interface, e.g., MS-DOS interface
Step 5: Enter the command “tftputil <IP address> <put> <sf_user.cfg>”
under the directory of configuration file and control files.
Example:
c:\> tftputil 192.168.10.2 put sf_user.cfg
When uploading, three LEDs, “MAINT” “ALARM” and “FAULT”, will
blink. Unless you finish uploaded, do not shut down and unlink cat 5
cable.
Step 6: Restart the system in the hyber terminal interface. The system will
restart according to your “sf_user.cfg”.
Example
IPDSLAM/SHDSL # restart
Yes or No <y/n>?
System is restarting now.Wait…..
Dynamix DC-16S/SA upgrade
This section describes how to upgrade the software of your Dynamix DC-
16S/SA. Step 1: Let your PC connect with the UPLINK port of Dynamix DC-
16S/SA by
using an Ethernet cable.
