Dynamix DC – 16 S/SA 16 ports SHDSL DSLAM modem/router
User Manual
Note:
(1) You can follow the following procedures of configuration backup and
configuration restore in Windows 2000s and Windows NT system, whereas
you should have tftp.exe in other Windows system.
(2) Before you back up or restore the configuration file “sf_user.cfg”, make sure
if those two control files and configuration file are in same directory.
Configuration Backup
This section describes how to back up your configuration settings form Dynamix
DC-16S/SA to computer. The following procedures will help you to back up
configuration:
Step 1: Open a terminal emulation interface in order to execute CLI.
Step 2: Enter the command “upgrade enable” in Command Line Interface
for executing TFTP to Dynamix DC-16S/SA.
Example
IPDSLAM/SHDSL# upgrade enable
Yes or No <y/n>? y
System is in the “upgrade” mode now. You could start to upgrade
the system file.
Note:
This step can be skipped, in case of without Ethernet-VLAN on each port.
Step 3: Enter the command “ show sysip” to get the <IP address> of
Dynamix DC-16S/SA. If you already know the IP address, you can skip
this step.
Example
IPDSLAM/SHDSL# show sysip
IP: 192.168.10.2
Submask: 255.255.255.0
Gateway: 192.168.10.1
