Dynamica Velocity 15HR, Instruction Manual

Page: 29 / 60

5-1
5. Other Functions
5.1 Selecting Rotor Stop Signal
The rotor stop signal can be selected from seven kinds of sounds including five tunes,
electronic beep, and no sound.
Currently selected sound starts as the
♪ button is pressed. Press again before
the sound ends to move to the next sound and the last played sound is chosen as the
rotor stop signal.
■ The tune stops by pressing any button on the operation panel while the selected
tune continues.
■ When no sound is selected, the indicators blink upon the rotor stop instead of a
tune or beep. By pressing any button on the operation panel, the indicators stop
blinking and stays lit.
♪ “Amaryllis” starts
♪ “My Grandfather’s Clock ” starts.
♪
“Twinkle, Twinkle, Little Star” starts.
When the rotor is
operated under this
condition, the beeper
sounds two beeps
upon the rotor stop.
♪ “The Jolly Finale”
starts.
♪
No sound
The beeper sounds a beep
only at the setting.
No sound is heard at the
rotor stop if this is selected.
♪
The beeper sounds two
beeps.
When the rotor is
operated under this
condition, the indicators
blink upon the rotor stop.
♪
“For Elise” starts.
NOTE ：
●
The rotor stop signal can be selected only while the rotor is stopped.