Dynamic SFC3, Operator'S Manual, Page: 54 / 141

Dynamic Fluid Measurement SFC3 Liquid Pulse Manual Data Entry 2-9
Date: 8/1/2019
DIAG
Read Single Flow Computer Communication Setup
Press

and the configuration program will attempt to communicate with a single Flow Computer at
different baud rates and formats.
Failure to communicate can occur because of a communication wiring problem, wrong PC port selection,
communication parameter mismatch between PC and Flow Computer (Modbus type, parity, baud rate,
etc.) or lack of power to the Flow Computer. To use this feature, the user must insure that only one Flow
Computer is connected to the PC. More than one Flow Computer in the loop will cause data collisions and
unintelligible responses.
Diagnostic Data
Diagnostic Data
shows real-time, live data. Use it to monitor switch outputs, status inputs, analog
inputs and outputs, analog frequency, failure codes and so forth. To control the switch outputs manually
use the F8 function key to freeze the screen, press the SPACE BAR to change activity, and use
ENTER
key
to move to next switch.