Dynamic SFC3, Operator'S Manual

Page: 53 / 141

Dynamic Fluid Measurement SFC3 Liquid Pulse Manual Data Entry 2-8
Date: 8/1/2019
Phone Book
Phone Book lists all the phone numbers with the phone’s owner new numbers can be added to the list.
<Arrow Keys> Select Number to Modify or Delete.

Add new entry to phonebook.

+

Delete selected entry.

or

ENTER Modify selected entry.
<Esc> Exit and save changes.
Phone Book Edit
Type name, press

, and type phone number. Press

ENTER
to save, <Esc> to leave entry unchanged.
In the phone number the following codes may be used:
<0-9> Dial digit
<P> Change to pulse dialing
<T> Change to tone dialing
<Comma> Pause
Example: T,9,1281-530-5539 instructs the dialer to use tone dialing, pause, dial 9 for an outside line,
pause, then dial the number.
Modem Setup
<Modem Dial Prefix> Enter the string sent to the modem before the phone number.
Normally either "ATDT" (dial tone) or "ATDP" (dial pulse)
<Modem Dial Suffix> Enter the string sent to the modem after the phone number.
Normally just "^M" (CR)
<Modem Hangup String> Enter the string sent to the modem to hang-up the phone.
See your modem manual for other characters.
Hang-up Phone
Press

ENTER
to send the Modem Hang-up string (Defined in Modem Setup) to the modem.
Note : Hand shake and error checking should be turned off. Commands
to turn off the hand shake vary between modems. Check your
modem manual. Typical command - AT&K0, AT&Y0.