Dynamic DX-REMG91, Installation Manual

Page: 3 / 80

About this Manual
This manual has been designed to help you install and configure a Dynamic
DX-REMG91/DX-REMG91S powerchair control unit for a ‘generic’ brand powerchair. For this
reason there are no guidelines for specific applications. If there is a specific requirement for
your application, please contact Dynamic Controls or one of the sales and service agents, to
assist you.
This manual should be read in conjunction with all other relevant DX-System manuals.
Throughout this manual there are a few symbols that will help you quickly identify the purpose
of the paragraph that follows:
Notes & Precautions:
Notes provide supporting information for the previous paragraph or
section that
should be followed in order to install, configure, and
use the product safely and efficiently.
Warnings:
Warnings provide important information for the previous paragraph
or section that
must be followed in order to install, configure, and
use the product safely and efficiently.
The term „programming‟ used throughout this manual refers to adjusting parameters and
configuring options to suit an application. ‘Programming’ does not change or alter any
software within the controller and is performed using a controlled programming tool available
only to authorised personnel.
The term „accessory‟ used throughout this manual refers to equipment that is ancillary to the
main functioning of the control system. It does not refer to an accessory of the wheelchair. The
control system is a component of the wheelchair.
DX is not user serviceable. Specialized tools are necessary for the repair of any component.
Do not install, maintain or operate this equipment without reading, understanding and
following this manual – including the Safety and Misuse Warnings – otherwise injury or damage
may result.
Due to continuous product improvement Dynamic reserves the right to update this manual. This
manual supersedes all previous issues, which must no longer be used.
Dynamic reserves the right to change the product without notification.
Any attempt to gain access to or in any way abuse the electronic components and
associated assemblies that make up the powerchair system renders the manufacturer’s
warranty void and the manufacturer free from liability.
Dynamic and the Dynamic logo are trademarks of Dynamic Controls.
All other brand and product names, fonts, and company names and logos are trademarks or
registered trademarks of their respective companies.
Dynamic owns and will retain all trademark rights and Dynamic or its licensors own and will
retain all copyright, trade secret and other proprietary rights, in and to the documentation.
All materials contained within this manual, in hard-copy or electronic format, are protected by
copyright laws and other intellectual property laws.
© Copyright 2005 Dynamic Controls. All rights reserved