Dynamic DX-REMG91, Installation Manual

Page: 16 / 80

GBK63648
:
Issue 3
– February 2012
10
3. Drive Mode
Each press of the Mode button will increment the drive profile,
up to the maximum configured value and then back to profile
1. The current drive profile will be shown in the 7 Segment
Display.
If Accessory or ECU functions are being operated, a press of
the Mode button will return to the last used drive profile.
Note:
If the chair is driving and the Drive Mode button is pressed, the drive
profile will increase by a single increment with each press until the
maximum configured value is reached. The Drive Mode button does
not enter any available accessory modes.
Note:
The programmable parameter Change Profile While Driving can be
used to select if changes to drive profile whist driving are required.
The programmable parameter Wrap Profiles is not used for this
product.
Note:
If the profile up button must be fail safe in a specific installation use the
REMG91/S mode input.
If the power button must be fail safe in a specific installation use the
REMG91/S power input instead.
.