I.
Power Supply (Control Box)
The POWER SUPPLY is the control center of the sauna room. It is installed on the
topside of the ROOF PANEL and has inputs/outputs connected to it. (see Figure 1)
Figure 1
POWER IN
- main power of the sauna room
HT1, HT2, HT3, HT4, HT5, HT6
–
heat emitter cords
LAMPROOF
– roof lamp power (optional)
LIGHTING
– chromotherapy lights
PANEL CONTROL
– control panel
FUSE RESET
– protects against power
II.
Component Labeling
Power Cord
–
Main power cord connects the POWER SUPPLY to the
dedicated wall outlet
HT1, HT2, HT3, HT4, HT5, HT6
– Heater cords connect the heat emitters to
the POWER SUPPLY at these ports (HT5 & HT6 are not used on most
models)
Lighting
– Connects the interior lighting to the POWER SUPPLY at this port
LampRoof
– Connects the exterior roof lights to the POWER SUPPLY at this
port
Panel Control
– Connects the Control Panel through the CTRL harness to
the Power Supply at this port
L/R Speakers
– Connects the speakers through these wires to the Control
Panel
Temp Sensor
– Connects the Temperature Sensor through this wire to the
Control Panel
Page 11
