18
Copyright © 2014 - 2017 Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.com
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Version 1.8
Updating JCD
JCD features an easy-to-use update mechanism that requires a USB pen drive and an update package (a ZIP file), which will be
available for download at
http://www.dynamicprojection.com/jcd-support/
.
To install an update, simply download the update package (named “jcd-update-xxx.zip”) and extract its contents onto an empty USB
pen drive. Remove the drive safely and plug it into one of the USB ports on the control unit, the update will then automatically start.
Please wait around a minute for the update to finish. After the update has finished, the “JCD VERSION” section on the “Sysinfo &
Log” tab should display the new version number.
NOTE: If your current setup is working correctly, it is not recommended to update the system.
