14
Copyright © 2014 - 2017 Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.com
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Version 1.8
Lens Memory
The lens memory feature enables easy recalling of certain focus/zoom adjustments without having to remember the exact position
values. If you are satisfied with a certain lens position, you can save it by selecting a memory slot number (recommended: values from
1 to 99) using the slider left to the “Save Memory” button and clicking on the button afterwards. A confirmation is required to prevent
accidental overwriting of already saved positions.
To move the lens to a previously saved position, use the exact same slider to select the memory slot and press the “Load Memory”
button. Zoom and focus will both be reset before the lens is moved to its new destination, unless there is no change in the current and
the new position value. It is also possible to disable this reset completely by setting the setting “Absolute Zoom/Focus reset on load”
to 1 in the configuration.
(exception: in the “undefined” state, there will always be a reset)
To delete all previously saved lens positions, use the “Clear Memory” button – again, a confirmation is required.
