Dynamax HPFM3 Installation And Operation Manual Download Page 82

Page: 82 / 86

Revision: JUNE 2017

79. Cochard, H., Martin, R., Gross, P., Bogeat-Triboulot, M.B. (2000)

Temperature effects

on hydraulic conductance and water relations of Quercus robur L. Journal of Experimental Botany, Vol. 51, No. 348, pp.

1255 - 1259.

The effects of temperature on root and shoot hydraulic conductances were investigated for Quercus robur L. saplings.

In the first experiment, conductances were measured with the HPFM on excised shoots and detopped root systems. In

the second experiment, the impact of temperature-induced changes in groot on sapling transpiration (E) and leaf water

potential was assessed. Intact plants were placed in a growth cabinet with constant air and variable soil temperatures.

The results illustrate the significance of gplant for the stomatal control of transpiration and the significance of temperature

for tree water transport.

Summary of Contents for HPFM3























































































Search results

Summary of Contents for HPFM3

Reviews:

Dynamax HPFM3, Installation And Operation Manual, Page: 82 / 86

Search results

Summary of Contents for HPFM3

Reviews: