Dynamax Dynamet 5 User Manual Download | Manualshive

Page: 2 / 83

background image

Dynamet 5

1

Copyright 2016 Dynamax Inc

All Rights Reserved

Version 1.1

This manual refers to Lascano-Van Bavel ETP computation algorithm, implementation of the algorithm in
Dynamet 5 weather station, including PC400 data logger support software for Dynamet 5 Weather
station.

Specifications  are  subject  to  change.  Dynagage  is  a  new  product  for  experimental  purposes  under
development.  DYNAMAX  Inc  assumes  no  liability  for  customer  assistance,  infringements  of  patents  or
copyrights arising from the use of this product. US Patents covering the construction of various stem flow
gauges  are  No  5,337,604  and  5,269,183.  DYNAMAX  does  not  warrant  or  represent  that  any  license,
either express or implied, is granted under any patent right, copyright, or other intellectual property right
of DYNAMAX relating to this product, or process. There are no implied warranties of merchantability or of
fitness for  a  particular  purpose  given  with  the  sale  of  any  goods.  DYNAMAX  Inc  shall  not  be  liable  for
consequential, incidental or special charges.

Dynagage, Dynamet, Flow32, Flow32W and Dynamax are trademarks of Dynamax Inc
Lascano-Van Bavel ET algorithm and CR200/CR1000 (Dynamet) program for the same are copyrights of
Dynamax Inc.

IBM is a registered trademark of International Business Machines
PC208W PC400 and LoggerNet are trademarks of Campbell Scientific Inc
Windows, Windows 95, Window 98, Windows NT, Windows2000, Windows Millennium, Microsoft Office,
Microsoft Excel are trademarks of Microsoft Corporation.

Updated: 5/12/2017

«
1
2
3
4
...
»

Summary of Contents for Dynamet 5




















































































Reviews:

No comments

Related manuals for Dynamet 5

Brand: La Crosse Technology Pages: 8

Brand: La Crosse Technology Pages: 22

Brand: La Crosse Technology Pages: 7

Brand: Hama Pages: 67

Brand: Teknofun Pages: 18

Brand: ACT Pages: 2

Brand: Aercus Pages: 20

Brand: Thermaltake Pages: 6

Brand: TOOQ Pages: 24

Brand: Oregon Scientific Pages: 15

Brand: Oregon Scientific Pages: 74

Brand: Oregon Scientific Pages: 128

Weather Report WR-25

Brand: Texas Weather Instruments Pages: 29

Brand: La Crosse Technology Pages: 25

Brand: BEARWARE Pages: 76

On Stage III WM

Brand: JBL Pages: 10

Brand: hager Pages: 4

Brand: Oregon Scientific Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands