Dynalink AXE10200, Manual, Page: 34 / 100

CHAPTER 6 - SPECIFY YOUR MESH Wi-Fi ROUTER SETTINGS
30
1.
Select the radio button to enable/disable port trigger.
2.
Click
.
Enter the parameters in accordance with your requirements.
3.
Click
Add
to have the rule created on port triggering list and then click to apply your changes. You can remove or edit any port
trigger rule by using the and icons.
Note
: The maximum number on port triggering list is 32 rules.
Well-known Applications
Select a well-known application from the dropdown menu
to set up the corresponding settings automatically.
Description
Name the rule according to your requirement.
Trigger port
Define the port number or the port range for triggering the
incoming ports.
Local IP list
Select the IP address in the dropdown menu which
automatically detected by your router.
Local IP
Enter the IP address of the device connecting to your
router.
Protocol
Select TCP or UDP in the dropdown menu.
Incoming port
Define the port number or the port range to be open while
detecting port triggered event.
Protocol
Select the TCP or UDP in the dropdown menu.