Dynalink AXE10200, Manual, Page: 25 / 100

CHAPTER 6 - SPECIFY YOUR MESH Wi-Fi ROUTER SETTINGS
21
PPTP
Enable NAT
Network Address Translation (NAT) is a method to substitute the information of IP address space from private IP to public IP
when the devices which connected to the router access to the Internet. The router records the source/destination address on
table and maps the IP while receiving packages from Internet.
WAN Connection Type
The connection type to access Internet.
MTU
Maximum transmission unit (MTU) is the largest data packet for the router capable to transmit and receive. The data packets
exceed MTU will be fragmented while transmitting and be reassembled once the packets reach the destination.
WAN IP Settings
Get WAN IP Automatically
Automatically get WAN IP address from the ISP.
IP Address
If your WAN connection requires a static IP address, key in the IP address in this field.
Subnet Mask
If your WAN connection requires a static IP address, key in the subnet mask in this field
Default Gateway
If your WAN connection requires a static IP address, key in the gateway IP address in this field.
WAN DNS Settings
Automatic DNS server address
Allows your router to get Domain name Service (DNS) IP address from the Internet Service Provider (ISP) automatically.
DNS1
Enter an IP address as the primary domain name server.
DNS2
Enter an IP address as the secondary domain name server.
Account Settings
Username
Enter username provided by your ISP.
Password
Enter password provided by your ISP.
PPTP Options
This item may be specified by some ISPs. Check with your ISP and fill them in if required.
Additional Pppd Options
This item may be specified by some ISPs. Check with your ISP and fill them in if required.