DEVICE DESCRIPTIONS
5-84
PROMATRIX System User Handbook 1.1
5.5.9 DCS 416R ANALOG I/O-MODULE
The module is meant for insertion on the rear of the DCS 400 base unit providing connection facilities for analog
control lines and potentiometers, with their levels are used for controlling volume controls or other continuous
parameters. Additionally, the control outputs provide analog voltages for controlling external devices that are
equipped with analog inputs.
•
8 analog inputs.
•
Voltages of 0 to 10V or a potentiometer to each input.
•
Plug-in binding post for reference voltage 10V.
•
8 analog outputs 0…10V DC.
•
Plug-in screw-flange binding posts for all inputs and outputs.
•
Maximally 2 DCS 416R / DCS 416 modules can be cascaded.
Installation Notes
Always equip slots 1-10 of a DCS 400 base unit in ascending order (from the left to the right) leaving no empty
slots in-between.
Combining modules of different type is possible.
Exception: Slot 1 (the slot all the way on the left) always needs to be equipped with a DCS 401R control module
or a DCS 405R extension module.
Mounting the module and establishing the connections are solely admissible when performed in accordance to
VDE 0100 and EN 60065 regulations.
Specifications
:
Operating voltage
24V DC, - 10 / +30%
Operating current (max.)
160 mA
Operating temperature range
+5° C .. +40°C
Dimensions (W x H x D)
37.5 x 80.6 x 245 mm
Weight
170 g
Inputs:
Voltage range (min. .. max.)
0 V .. 10 V DC
Impedance range ext. (min. .. max.)
0...10 Kohm
Maximum input voltage
50 V DC
Output level:
Voltage range (min. .. max.)
0 V..10 V DC
Output impedance
47 Ohm
Maximum load
2 kOhm
Reference voltage source:
Output voltage
10 V DC
Maximum output current
30 mA
Resolution Input and
Output signals
8 Bit
Summary of Contents for PROMATRIX System
Page 1: ...Reference Manual...
