Dynacord PROMATRIX System, Reference Manual

Page: 52 / 124

DEVICE DESCRIPTIONS
5-40 PROMATRIX System User Handbook 1.1
5.2.8 Indications
The following table provides you with an overview of the most important LED-indications.
LED Status Description
Selection LED OFF No group or area selected
(not with DPC 4106) Lights green Area or group selected / special function activated / direct call
activated
ALLE LED OFF No collective call selected
(not with DPC 4106) Lights green Collective call pre-selected / direct collective call activated
BUSY LED OFF System not busy, clear for call
Lights green During own message
Slow blinking, green Low priority paging station launches a call in selected areas;
interruption on cost of the momentary microphone terminal is
possible
Fast blinking, green System is busy with a higher priority transmission (message,
gong, alarm), interruption is not possible, already launched
call is interrupted by events with higher priority setting
GONG LED OFF No gong signal started
Lights green Gong signal in progress; manually started or pre-
programmed pre-gong signal
Lights green Gong signal in progress, ignited from another source or time-
controlled
ON LED OFF System is OFF (stand-by mode)
Lights green System is ON and ready for operation
Blinks green System has been turned on and is booting (initialization)
PROGRAMM LED OFF Paging console is in message-mode
Lights green Paging console is in program assign mode
Slow blinking, green Paging console is password-protected
Fast blinking, green Paging console is in setup-mode
TEXT LED OFF No text message launched
Lights green Text message in progress, manually launched
Blinks green Text message in progress, launched from another source or
time-controlled
ALARM OFF No alarm signal launched
Lights red Alarm signal has been launched from any source
Blinks red Alarm signal has already been stopped, but keeps running
until signal-end