Dynacord DPA 8150, User Manual

Page: 11 / 46

Number Element Description
1 Power output terminals OUT Power output for speaker zones; for further
information see the section entitled Power
outputs on the output stage, page 15
2 AEC audio input, AEC Common audio input for all channels. For
further information see the section entitled
Audio inputs, page 13
3 CONTROL PORT with READY
contact Control port with inputs, open collector
outputs and potential-free READY relay
contacts. For further information see the
section entitled CONTROL PORT, page 18
4 CAN ADDRESS selector switch HIGH-byte and LOW-byte for configuring the
CAN address. For further information see
the section entitled Setting the CAN address,
page 28
5 STATUS LED The yellow STATUS LED indicates the
current status of the CAN connection.
Further information can be found in the
section entitled Setting the CAN address,
page 28
6 REMOTE CAN BUS connections Connection with CAN bus, e.g. DPM 8016.
For further information see the section
entitled REMOTE CAN BUS, page 20
7 Extension slot Enables an extension module to be retro-
fitted.
8 Direct audio input Direct audio input (IN) per channel; for
more information see the section entitled
Audio inputs, page 13
9 Type plate
10 DC INPUT 24 V DC input; for further information see the
section entitled Supply voltage, page 22
11 VOLTAGE SELECTOR Selection of the power supply voltage; for
further information see the section entitled
Supply voltage, page 22
12 AC MAINS INPUT AC input; for further information see the
section entitled Supply voltage, page 22
13 POWER switch Power switch; for further information see
the section entitled Supply voltage, page
22
PROMATRIX 8000 POWER AMPLIFIER Safety information | en 11
User manual 19-Aug-13 | 03 | F01U217494