00-37723EZ1EA2
7
PRECAUTIONS
1. Handle the camera carefully
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be
damaged by improper handing or storage.
2. Do not disassemble the camera
To prevent electric shock, do not remove screws or covers. There are no user
serviceable parts inside. Ask a qualified service person for servicing.
3. Do not block cooling holes on the bracket
This camera has a cooling fan inside. Blocking the cooling holes leads to build up
of heat the camera and may cause malfunction.
4. Do not operate the camera beyond the specified temperature, humidity or
power source ratings
Use the camera under conditions where temperature is between 0°C ~ 40°C
(32°F ~ 104°F), and humidity is below 90%.
5. Do not expose the camera to rain or moisture, or try to operated it in wet
areas
This product is designed for indoor use or locations where it is protected from
rain and moisture. Turn the power off immediately and ask a qualified service
person for servicing. Moisture can damage the camera and also create the
danger of electric shock.
6. Do not use strong or abrasive detergents when cleaning the camera body
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove,
use a mild detergent and wipe gently.
7. Never face the camera towards the sun
Do not aim the camera at bright objects. Whether the camera is in use or not,
never aim it at the sun or other extremely bright objects. Otherwise, blooming or
smear may be caused.
* PELCO
is a registered trademark of
PELCO
Corporation.
* P protocol
and
D protocol
are protocols what
PELCO
corporation used.
* DM
is a registered trademark of
Dedicated Micro
Corporation.
