00-37723EZ1EA2
65
Sequence
Mode
SEQUENCE
Enter the sequence line you wish the Dome execute when alarm pin is
triggered.
DWELL TIME (Seconds)
Camera will stay at the preset position for “DWELL TIME” seconds then go back
to previous position. If you select “Always”, dome will go to the preset position
and stay there until alarm condition is released or user move its joystick on
keyboard.
EXIT
Quit the ALARM SETTING menu.
12. HOME SETTING
Home parameters can be set on this page.
HOME FUNC
Turn home function on or off.
SELECT MODE (AUTOPAN/ SEQUENCE/ CRUISE/ PRESET)
Dome will go to execute this mode function when home function is enabled and
the “RETURN TIME” is reached.
RETURN TIME (MIMUTES)
Dome will start to count “RETURN TIME” when user move the camera to
arbitrary position.
AUTOPAN/ SEQUENCE LINE/ CRUISE/ PRESET POS
This item is detailed mode setting of home function. This item will vary with
‘SELECT MODE’ item.
GO.
Go to execute home function (
HOME FUNC ON only
).
EXIT
Quit the HOME SETTING menu.
13. SEQUENCE
Sequence parameters can be set on this page.
SEQUENCE LINE
There are four sets of sequence lines built in dome camera. You can choose a
line to execute. Please use LEFT/RIGHT of direction key to select your
sequence line.
SEQUENCE POINT
There are 32 sets of sequence points can be specified in every sequence line.
The sequence points are linked list. Sequence function will go through the
linked list again and again.
