00-37723EZ1EA2
54
SEQUENCE POINT
There are 32 sets of sequence points can be specified in every sequence line.
The sequence points are linked list. Sequence function will go through the
linked list again and again.
PRESET POSITION
You can specify a preset position where the dome should go to at this
sequence point.
SPEED
Speed is adjustable from 1~15.
DWELL TIME
Dome will stay on the sequence point for “DWELL TIME” then go to next
sequence point.
RUN SEQUENCE
User can command dome camera to execute sequence function.
EXIT
Quit the SEQUENCE menu.
14. AUTOPAN
AutoPan parameters can be set on this page. User can enable dome camera to
do continuously panning without limit through setting the start point the same as
endpoint.
START POINT
Start position of the “AUTOPAN path”.
TO FIND:
Press ‘ENTER’ to go into joystick mode. User can move camera to
suitable position under joystick mode.
TO SAVE:
Press ‘ENTER’ to set this position as start point and escape
joystick mode.
END POINT
End position of the “AUTOPAN path”.
TO FIND:
Press ‘ENTER’ to go into joystick mode. User can move camera to
suitable position under joystick mode.
TO SAVE:
Press ‘ENTER’ to set this position as end point and escape
joystick mode.
DIRECTION
Rotational direction of dome camera.
SPEED
AUTOPAN function will rotate camera with this speed.
RUN AUTOPAN
Execute AUTOPAN function.
EXIT
Quit the AUTOPAN menu.
