00-37723EZ1EA2
60
OSD MENU (S MODEL)
There are two pages of OSD setup menu allow users to control the camera
parameters, these functions are described in the following sections in detail. Please
use LEFT/ RIGHT/ UP/ DOWN of direction keys to select your parameters.
1. DEFAULT
If you select ON for this item, all the camera parameters will be restored to the
factory initial (default) data. Once you modify any of the following items, this item
become OFF.
2. BACKLIGHT
In case that excessive light is behind the center object, it is necessary to prevent
the center object too dark.
Turn this item ON, the center object will be brighten in contrast to the edge of the
picture (where a backlight would most likely be located).
3. FOCUS
The focus of the dome camera can be operated in two different modes: ‘Manual
Focus mode’ and ‘Auto Focus mode’.
Manual
Users can the move focus lens by pressing the “focus Near/ Far button” on the
control keyboard. The focus speed of lens can be adjusted through this item.
Auto
The optimum focus is achieved by the internal digital circuit. User can select a
suitable item for different condition.
Normal AF Mode:
This is the normal mode for AF operations.
Interval AF Mode:
The mode used for AF movements carried out at
particular intervals. The time intervals for AF
movements and for the timing of the stops can be
set
in one-second increments using the Set Time
Command. The initial value for both is set to five
seconds.
Zoom Trigger Mode:
When the zoom is changed with the TELE or the
WIDE buttons, the pre-set value (initially set at 5
seconds) becomes that for AF Mode. Then, it stops.
