00-37723EZ1EA2
43
▓
Event Script Edit:
Text window to enter event script manually.
▓
Event Status:
Indicate the event status, “Stop Now” or “Start Now”.
▓
Message:
A window to show the results when below command icon
pressed --- normally will show “OK”, “Parsing”, “Fail”, Or “Err String” which
indicates the syntax error of parsing, and starts from the error position in
the script.
▓
Save Script:
Command to save and parse current scripts in the “Event
Script Edit” window. If any syntax errors are detected, the error message,
indicating the starting position of syntax error, will be shown in the
“Message” window.
▓
Event Auto Start when Power On:
The flag is to set the event script
auto start-up when the system is powered on.
NOTE
: Any changes in “Event Script Edit” window must “Save Script”
before “Start Script”; otherwise, the new changes will be lost and won’t
take effective. Also the changes won’t be saved into permanent memory
unless you click the “Save Changes” button in main Administration panel.
▓
Clear:
Command to clean up “Event Script Edit” window.
▓
Start Script:
Command to start the script execution.
▓
Stop Script:
Command to stop the script execution.
▓
Script Wizard:
Command to start the script wizard. It helps user to make
simple script automatically by wizard, but the wizard supports only partial
trigger and action commands. To fully leverage the complete
functionalities of event script, please refer to “Appendix: Event Script
Programmers Guide”.
