Fin
S2 x 2.3CT
When removing the Fin, be sure to remove the screws in the reverse order of the
number marked on the Fin.
When installing the Fin, be sure to install the screws in the order of the number
marked on the Fin.
1. Set the Fans in place on the Cover Assembly and secure them with
the screws.
2. Connect the
Fan harness
to the connector
CN3380
and
CN3390
on the
System Board (FMERSY*)
.
4.19 Fin
4.19.1
Removing the Fin
To remove the Fin, follow the steps below and refer to
Figure 4-21
.
1. Remove the following screws and then the
Fin
.
Figure 4-21 Removing the Fin
4.19.2
Installing the Fin
To install the Fin, follow the steps below and refer to
Figure 4-21
.
1. Set the
Fin
in place and secure it with the screws.
