1. Stick the Click Pad Mylar to a new Click Pad.
2. Peel off the separator on the Click Pad RIM ASSY and stick the new
Click Pad
to the Cover Assembly.
Figure 4-24 Installing the Click pad
3. Stick the gasket tape to the Click pad and stick the square cushion.
4. Connect the
Click Pad FFC
and
Fingerprint FFC
to the connector on
the Click Pad and the connector
CN9510
and
CN9550
on the
System
Board
.
4.21 Speaker
4.21.1
Removing the Speaker
To remove the Speaker, follow the steps below and refer to
Figure 4-25
to
Figure 4-26
.
1. Remove the stick tape.
2. Disconnect the
Speaker harness
from the connector
CN6290
on
the system board.
3. Release the
Speaker harness
from the guides.
